Alachisoft NCache 4.1 - Online Documentation

Step 1: Configure the Cache

Create a Clustered Cache named 'myQSReplicatedCache' as follows:
  • Launch NCache Manager from Start->Programs->NCache->NCache Manager.
  • Create a new project.
  • Create a new cluster. Select following options from the New Cluster Wizard:
  • Cluster name: myQSReplicatedCache
  • Cluster Type: Replicated
  • Operation Timeout: 60 sec's (default)
  • Statistics Replication Interval: 600 sec (default)
  • Member Nodes: At least your current computer and maybe others if you want.
  • Cluster Port: 8714
  • Cache Name: Provide a unique identifier for the cache.
  • Maximum Size: 250MB (default)
  • Eviction: Priority based
  • Default Priority: Normal
  • Eviction Percentage: 5 (default)(In case of sessions it is recommended that turn off eviction)
  • Clean Interval (sec's.): 15 (default)
  • Verify that cluster is running. For this, determine cache behavior by adding and removing objects from Statistics Window.
  • Clear cluster to make it ready for your application.
Specifying InProc or OutProc Access Mode
Please note that this cluster has been configured to be used as OutProc. You can verify this by looking at the 'Isolation Level' property on the Main tab of the Cluster details window. If you want to change it to InProc, do the following:
  • Go to Main tab
  • Change Isolation Level to 'Low'. This sets it for InProc. 'High' means OutProc.
  • Apply changes to the cluster. You will notice that you no longer have the 'myQSReplicatedCache node->Start' menu enabled. This is because the cluster is now supposed to start as part of your application process.
  See Also

Copyright © 2005-2012 Alachisoft. All rights reserved.