The removeclientnode utility allows you to remove a particular client node from a cluster.
removeclientnode cache-id(s) /s[servername] server-name /c[clientnode] [option[...]]
|
Argument
|
Description
|
|
cache-id(s)
|
Specifies one or more id(s) of a Clustered Cache. Cache must exist on source server.
|
|
/s[servername] source-server-name
|
Specifies a server name where the NCache service is running and a cache with the specified cache-id is registered. Cache configuration is copied from this server to the destination server. The default is the local machine.
|
|
/c[clientnode] client-node-name
|
Specifies the client node name where the NCache service is running to remove it from the cache's current client nodes.
|
|
Option
|
Description
|
|
/p[port] port-number
|
Specifies a port number for communication with the NCache server.
|
|
/nologo
|
Suppresses display of the logo banner.
|
|
/?
|
Displays command syntax and options for the utility.
|
Remarks
The system, where you use removeclientnode utility, must have NCache service installed and running. By default, removeclientnode utility tries to remove a client node if it is already exists in a cluster. Otherwise it will prompt an error.
Examples
The following command removes a client node from a specified cache and server.
removeclientnode mycache /s 20.200.20.2 /c 20.200.20.2
The following command specifies the port number for communication with NCache server.
removeclientnode mycache /s 20.200.20.2 /c 20.200.20.2 /p 7803
The following command displays the command syntax and options for the utility. Logo banner is displayed as a part.
removeclientnode mycache /s 20.200.20.2 /c 20.200.20.2 /?
The following command displays the command syntax and options for the utility suppressing the display of the logo banner.
removeclientnode mycache /s 20.200.20.2 /c 20.200.20.2 /? /nologo
See Also