Requête sur les structures de données
Les structures de données peuvent être interrogées dans le cache si elles ont attributs de recherche qui leur sont associés lors de la création de la structure de données. Ces attributs consultables incluent :
Pré-requis
- Pour en savoir plus sur les prérequis standard requis pour travailler avec tous NCache fonctionnalités côté client, veuillez vous référer à la page donnée sur Prérequis de l'API côté client.
- Pour plus de détails sur l'API, reportez-vous à : ICache, RequêteCommand, ICacheReader, Service de recherche, ExécuterReader, Getvalue, IDistributedList, ObtenirGroupData, Fieldcount, IDistributedDictionary, ObtenirByTag.
- Pour en savoir plus sur les prérequis standard requis pour travailler avec tous NCache fonctionnalités côté client, veuillez vous référer à la page donnée sur Prérequis de l'API côté client.
- Pour plus de détails sur l'API, reportez-vous à : Cache, RequêteCommand, Lecteur de cache, getSearchService, exécuterReader, getFieldCount, obtenirValeur, ListeDistribuée, obtenirGroupData, Attributs de structure de données, Carte distribuée, obtenirByTag.
- Pour en savoir plus sur les prérequis standard requis pour travailler avec tous NCache fonctionnalités côté client, veuillez vous référer à la page donnée sur Prérequis de l'API côté client.
- Pour plus de détails sur l'API, reportez-vous à : Cache, RequêteCommand, Service de recherche, getSearchService, exécuterReader, getFieldCount, obtenirValeur, obtenirGroupData, Lecteur de cache, Attributs de structure de données, obtenirByTag.
- Pour en savoir plus sur les prérequis standard requis pour travailler avec tous NCache fonctionnalités côté client, veuillez vous référer à la page donnée sur Prérequis de l'API côté client.
- Pour les détails de l'API, reportez-vous à : Cache, RequêteCommand, Lecteur de cache, exécuter_reader, Service de recherche, get_search_service, Attributs de structure de données, get_field_count, obtenir_valeur, get_group_data, get_by_tag.
Rechercher des structures de données par groupes
Requête SQL
L'exemple de code suivant récupère tous les éléments du cache qui ont été associés à un groupe spécifié, Electronique. Le Groupe peut être associé à l'aide DataTypeAttributes
classe lors de la création de la structure de données.
Important
- Si plusieurs listes sont spécifiées pour le groupe, elles seront toutes renvoyées dans un seul résultat, à condition que leurs structures de données soient similaires.
- Pour plusieurs éléments de cache, par exemple, si un
CacheItem
et une liste appartiennent au même groupe, vous devez vous assurer que les données sont traitées en conséquence.
// Preconditions: Cache is already connected
// Items with groups exist in cache
// Custom class is query indexed through the NCache Management Center or config.ncconf
// Search for items with group
// Provide Fully Qualified Name (FQN) of your custom class
string query = "SELECT ProductID FROM FQN.Customer WHERE $Group$ = ?";
/// Use QueryCommand for query execution
var queryCommand = new QueryCommand(query);
// Providing parameters for query
queryCommand.Parameters.Add("$Group$", "Electronics");
// Executing QueryCommand through ICacheReader
ICacheReader reader = cache.SearchService.ExecuteReader(queryCommand);
// Check if the result set is not empty
if (reader.FieldCount > 0)
{
while (reader.Read())
{
string ProductID = reader.GetValue<string>(1);
// Perform operations
}
}
else
{
// Null query result set retrieved
}
// Preconditions: Cache is already connected
// Items with groups exist in cache
// Custom class is query indexed through NCache Management Center or config.ncconf
// Search for items with group
// Provide Fully Qualified Name (FQN) of your custom class
String query = "SELECT productID FROM FQN.Customer WHERE $Group$ = ?";
// Use QueryCommand for query execution
var queryCommand = new QueryCommand(query);
// Providing parameters for query
queryCommand.getParameters().put("$Group$", "Electronics");
// Executing QueryCommand through CacheReader
CacheReader reader = cache.getSearchService().executeReader(queryCommand);
// Check if the result set is not empty
if (reader.getFieldCount() > 0) {
while (reader.read()) {
String productID = reader.getValue(1, String.class);
// Perform operations
}
} else {
// Null query result set retrieved
}
// This is an async method
// Preconditions: Cache is already connected
// Items with groups exist in cache
// Custom class is query indexed through the NCache Management Center or config.ncconf
// Search for items with group
// Provide Fully Qualified Name (FQN) of your custom class
var query = "SELECT productID FROM FQN.Customer WHERE $Group$ = ?";
/// Use QueryCommand for query execution
var queryCommand = new ncache.QueryCommand(query);
// Providing parameters for query
let map = new Map();
var parameters = map.set("$Group$", "Electronics");
queryCommand.setParameters(parameters);
// Executing QueryCommand through CacheReader
var searchService = await this.cache.getSearchService();
var reader = await searchService.executeReader(queryCommand);
// Check if the result set is not empty
if (reader.getFieldCount() > 0) {
while (reader.read()) {
var productID = reader.getValue(1, Number());
// Perform operations
}
} else {
// Null query result set retrieved
}
# Preconditions: Cache is already connected
# Items with groups exist in cache
# Custom class is query indexed through NCache Management Center or config.ncconf
# Search for items with group
# Provide Fully Qualified Name (FQN) of your custom class
query = "SELECT product_id FROM FQN.Customer WHERE $Group$ = ?"
# Use QueryCommand for query execution
query_command = ncache.QueryCommand(query)
# Providing parameters for query
parameters = {"$Group$": "Electronics"}
query_command.set_parameters(parameters)
# Executing QueryCommand through CacheReader
search_service = cache.get_search_service()
reader = search_service.execute_reader(query_command)
# Check if the result set is not empty
if reader.get_field_count() > 0:
while reader.read():
product_id = reader.get_value(str, 1)
# Perform operations
else:
# None query result set retrieved
print("Query result is None")
API de groupe
L'exemple de code suivant récupère toutes les listes du cache qui ont été associées à un groupe spécifié, Electronique. Le groupe peut être associé à l'aide de DataTypeAttributes
classe lors de la création de la structure de données.
// List with this group already exists in cache
string groupName = "Electronics";
IDictionary<string, IDistributedList<Product>> result = cache.SearchService.GetGroupData<IDistributedList<Product>>(groupName);
if (result != null && result.Count > 0)
{
// Iterate over list
foreach (var item in result)
{
foreach (var i in item.Value)
{
// Perform operations
}
}
}
else
{
// No data against the group found
}
// Precondition: Cache is already connected
// List with this group already exists in the cache
String groupName = "Electronics";
Map<String, DistributedList<Product>> result = cache.getSearchService().getGroupData(groupName);
if (result != null && result.size() > 0) {
// Iterate over list
for (var item : result.entrySet()) {
// Perform operations
}
} else {
// No data against the group found
}
// This is an async method
// Precondition: Cache is already connected
// List with this group already exists in the cache
var groupName = "Electronics";
var result = await (
await this.cache.getSearchService()
).getGroupData(groupName);
if (result != null && result.size() > 0) {
// Iterate over list
for (var item in result.entrySet()) {
// Perform operations
}
} else {
// No data against the group found
}
# Precondition: Cache is already connected
# List with this group already exists in the cache
group_name = "Electronics"
result = cache.get_search_service().get_group_data(group_name)
if result is not None and len(result) > 0:
# Iterate over list
for item in result:
# Perform operations
print(item)
else:
# No data against the group found
print("No data found")
Notes
Pour garantir la sécurité de l'opération, il est recommandé de gérer toutes les exceptions potentielles au sein de votre application, comme expliqué dans Gestion des échecs.
Requête SQL
L'exemple de code suivant récupère les éléments du cache qui ont été associés à une balise spécifiée, Acier. La balise peut être associée à l'aide de DataTypeAttributes
classe lors de la création de la structure de données.
// Items are already present in the cache with tags
// Custom class is query indexed through NCache Management Center or config.ncconf
// Search for items with tags
// Use the Fully Qualified Name (FQN) of your own custom class
string query = "Select $Value$ FROM FQN.Product WHERE $Tag$ = ?";
// Use QueryCommand for query execution
var queryCommand = new QueryCommand(query);
queryCommand.Parameters.Add("$Tag$", "Stainless Steel");
// Executing query
ICacheReader reader = cache.SearchService.ExecuteReader(queryCommand);
// Check if result set is not empty
if (reader.FieldCount > 0)
{
while (reader.Read())
{
// Get the value of the result set
Product result = reader.GetValue<Product>(1);
}
}
else
{
// Null query result set retrieved
}
// Pre-conditions: Cache is already connected
// Items are already present in the cache with tags
// Custom class is query indexed through NCache Management Center or config.ncconf
// Search for items with tags
// Use the Fully Qualified Name (FQN) of your own custom class
String query = "Select $Value$ FROM FQN.Product WHERE $Tag$ = ?";
// Use QueryCommand for query execution
var queryCommand = new QueryCommand(query);
queryCommand.getParameters().put("$Tag$", "Stainless Steel");
// Executing query
CacheReader reader = cache.getSearchService().executeReader(queryCommand);
// Check if result set is not empty
if (reader.getFieldCount() > 0) {
while (reader.read()) {
// Get the value of the result set
Product result = reader.getValue(1, Product.class);
}
} else {
// Null query result set retrieved
}
// This is an async method
// Pre-conditions: Cache is already connected
// Items are already present in the cache with tags
// Custom class is query indexed through NCache Management Center or config.ncconf
// Search for items with tags
// Use the Fully Qualified Name (FQN) of your own custom class
var query = "Select $Value$ FROM FQN.Product WHERE $Tag$ = ?";
// Use QueryCommand for query execution
var queryCommand = new ncache.QueryCommand(query);
var map = new Map();
var parameters = map.set("$Tag$", "Stainless Steel");
queryCommand.setParameters(parameters);
// Executing query
var searchService = await this.cache.getSearchService();
var reader = await searchService.executeReader(queryCommand);
// Check if result set is not empty
if (reader.getFieldCount() > 0) {
while (reader.read()) {
// Get the value of the result set
var result = reader.getValue(1, ncache.JsonDataType.Object);
// Perform operations
}
} else {
// Null query result set retrieved
}
# Pre-conditions: Cache is already connected
# Items are already present in the cache with tags
# Custom class is query indexed through NCache Management Center or config.ncconf
# Search for items with tags
# Use the Fully Qualified Name (FQN) of your own custom class
query = "Select $Value$ FROM FQN.Product WHERE $Tag$ = ?"
# Use QueryCommand for query execution
query_command = ncache.QueryCommand(query)
parameters = {"$Tag$": "Stainless Steel"}
query_command.set_parameters(parameters)
# Executing query
search_service = cache.get_search_service()
reader = search_service.execute_reader(query_command)
# Check if result set is not empty
if reader.get_field_count() > 0:
while reader.read():
# Get the value of the result set
result = reader.get_value(Product, 1)
# Perform operations
else:
# Null query result set retrieved
print("Query result is None")
API de balise
L'exemple de code suivant récupère toutes les instances de dictionnaire du cache qui ont été associées à une balise spécifiée, Acier. La balise peut être associée à l'aide de la DataTypeAttributes
classe lors de la création de la structure de données.
// Items against this tag exist in cache
Tag tag = new Tag("Stainless Steel");
// Get dictionary against tag
IDictionary<string, IDistributedDictionary<string, Product>> result = cache.SearchService.GetByTag<IDistributedDictionary<string, Product>>(tag);
if (result != null && result.Count > 0)
{
foreach (var item in result)
{
// Perform operations
}
}
else
{
// Dictionary does not exist against tag
}
// Precondition: Cache is already connected
// Items against this tag already exist in the cache
Tag tag = new Tag("Stainless steel");
// Get map against tag
Map<String, DistributedMap<String, Product>> result = cache.getSearchService().getByTag(tag);
if (result != null && result.size() > 0) {
for (var item : result.entrySet()) {
// Perform operations
}
} else {
// Dictionary does not exist against tag
}
// This is an async method
// Precondition: Cache is already connected
// Items against this tag already exist in the cache
var tag = [new ncache.Tag("Stainless steel")];
// Get map against tag
var result = await (await this.cache.getSearchService()).getByTag(tag);
if (result != null && result.size() > 0) {
for (var item in result.entrySet()) {
// Perform operations
}
} else {
// Dictionary does not exist against tag
}
# Precondition: Cache is already connected
# Items against this tag already exist in the cache
tag = ncache.Tag("Stainless steel")
# Get map against tag
result = cache.get_search_service().get_by_tag(tag)
if result is not None and len(result) > 0:
for item in result:
# Perform operations
print(item)
else:
# Dictionary does not exist against tag
print("Dictionary not found")
NCache utilise l' $DataType$
mot clé qui récupérera toutes les structures de données avec la balise nommée spécifiée. Le code suivant suppose qu'une liste a été ajoutée avec une balise nommée La remise avec une valeur 0.4 et le récupère à l'aide de requêtes.
// Data Structures exist with NamedTag Discount and value 0.4
// Create query
string query = "SELECT * FROM $DataType$ WHERE Discount = 0.4";
// Use QueryCommand for query execution
var queryCommand = new QueryCommand(query);
// Execute Query to search cache
ICacheReader queryResult = cache.SearchService.ExecuteReader(queryCommand);
// queryResult contains all the keys and metadata of result
if (queryResult.FieldCount > 0)
{
while (queryResult.Read())
{
// Key of list can be fetched through
queryResult.GetValue<DistributedList>(1);
}
}
else
{
// Null query result set retrieved
}
// Pre-conditions: Cache is already connected
// Data Structures exist with NamedTag "Discount" and value 0.4
// Create query
String query = "SELECT * FROM $DataType$ WHERE Discount = 0.4";
// Use QueryCommand for query execution
var queryCommand = new QueryCommand(query);
// Execute Query to search cache
CacheReader queryResult = cache.getSearchService().executeReader(queryCommand);
// queryResult contains all the keys and metadata of result
if (queryResult.getFieldCount() > 0) {
while (queryResult.read()) {
// Key of list can be fetched through
queryResult.getValue(0, DistributedList.class);
// Perform operations
}
} else {
// Null query result set retrieved
}
// This is an async method
// Pre-conditions: Cache is already connected
// Data Structures exist with NamedTag "Discount" and value 0.4
// Create query
var query = "SELECT * FROM $DataType$ WHERE Discount = 0.4";
// Use QueryCommand for query execution
var queryCommand = new ncache.QueryCommand(query);
// Execute Query to search cache
var searchService = await this.cache.getSearchService();
var queryResult = await searchService.executeReader(queryCommand);
// queryResult contains all the keys and metadata of result
if (queryResult.getFieldCount() > 0) {
while (queryResult.read()) {
// Key of list can be fetched through
queryResult.getValue(0, Number());
// Perform operations
}
} else {
// Null query result set retrieved
}
# Pre-conditions: Cache is already connected
# Data Structures exist with NamedTag "Discount" and value 0.4
# Create query
query = "SELECT * FROM $DataType$ WHERE discount = 0.4"
query_command = ncache.QueryCommand(query)
# Execute Query to search cache
search_service = cache.get_search_service()
query_result = search_service.execute_reader(query_command)
# queryResult contains all the keys and metadata of result
if query_result.get_field_count() > 0:
while query_result.read():
# Key of list can be fetched through
query_result.get_value(int, 1)
# Perform operations
else:
# No data containing the named tag(s) exist
print("Data not found")
Ressources additionnelles
NCache fournit un exemple d'application pour interroger des structures de données sur GitHub.
Voir aussi
.RAPPORTER: Alachisoft.NCache.Client.DataTypes espace de noms.
Java: com.alachisoft.ncache.client.datastructures espace de noms.
Node.js : Gestionnaire de structure de données classe.
python: ncache.client.datastructures classe.