Ensure Environment Prerequisites
Before you start creating caches and cache clusters, you need to ensure that the following criteria have been met:
If you have a firewall enabled, then you need to make sure to expose NCache specific ports, the details of which are provided in the Configure Firewall section.
If you have multiple network calls in your cache servers, then you need to ensure that your NCache server is bound to one IP address. To understand how you can bind an IP address to the NCache server, refer to the Configure IP Binding in Multiple NICs section.
If you're using a Distributed Lucene with Persistence in-memory Store type, it is strongly encouraged that you use an SSD instead of an HDD for optimal performance.
In This Section
This section explains how to configure your firewall to allow NCache ports.
IP Binding with Multiple NICs
This section explains how to configure your IP addresses in case you are using Multiple Network Interface Cards.
This section explains how to launch PowerShell in Linux.